Show simple item record

dc.contributor.advisorAltamirano Flores, Ernesto
dc.contributor.authorFerrer Rosales, Jared Brillit
dc.contributor.authorMagallan Tejada, Vanessa
dc.date.accessioned2022-09-26T22:35:06Z
dc.date.available2022-09-26T22:35:06Z
dc.date.issued2022-09-08
dc.identifier.urihttp://hdl.handle.net/10757/661185
dc.description.abstractEl presente trabajo de investigación tiene como objetivo el análisis y planteamiento de una propuesta de mejora para la ineficiencia en el área de ensamble de sanitarios, centrándose en el producto principal: sanitario de una pieza. El problema de la ineficiencia origina un incumplimiento del plan de producción mensual con un impacto monetario de S/. 994,074.00 mensuales y ha sido ocasionado por un 23.58% de tiempo improductivos, movimientos ineficientes en un 45.25% y un 31.16% en exceso de desplazamiento de la pieza. El modelo propuesto integra la Ingeniería de Métodos (estudio de tiempos y métodos) y la Planificación Sistemática del layout. Asimismo, cuenta con una validación funcional, con una simulación con el software Arena y resultados positivos a nivel financiero. Mediante la simulación con la aplicación de las técnicas se logra el incremento de la eficiencia en un 14% aproximadamente y, a través del flujo de caja económico y el financiero, se obtuvo un índice de rendimiento de S/. 5.01 y S/. 18.11 respectivamente. La estructura de la investigación se divide en 5 capítulos: El primero, presenta los antecedentes del sector, identifica y formula el problema, los objetivos y la propuesta de solución, en conjunto con el marco teórico y estado del arte. El segundo, realiza el diagnóstico de la situación actual. Además, describe la empresa y los procesos en estudio. El tercer capítulo explica y desarrolla el modelo de solución propuesto. El cuarto, presenta la validación de dicho modelo; y, el quinto, las conclusiones y recomendaciones del proyecto.es_PE
dc.description.abstractThe objective of this research is to analyze and propose an improvement for the inefficiency in the sanitary assembly area, focusing on the main product: toilet of one part. This problem causes a breach of the monthly production plan with a monetary impact of S /. 994,074.00 and has been originated by 23.58% of unproductive time, inefficient movements in 45.25% and 31.16% in excess of displacement of the piece. The proposed model integrates engineering techniques: The Standardization of work and Systematic Layout Planning. The model is validated by a simulation in the Arena software and the result is an increase in efficiency of 14% approximately. Moreover, an economic cash flow and a financial cash flow are analyzed, from which a performance index of S /. 5.01 and S /. 18.11 respectively. The structure of the research is divided into 5 chapters: The first, presents the background of the sector, identifies, and formulates the problem, the objectives, and the proposed solution, in conjunction with the theoretical framework and state of the art. The second makes a diagnosis of the current situation. In addition, it describes the company and the processes under study. The third chapter explains and develops the proposed solution model. The fourth presents the validation of the model; and the fifth, the conclusions and recommendations of the project.es_PE
dc.description.uriTrabajo de Suficiencia Profesionales_PE
dc.formatapplication/pdfes_PE
dc.formatapplication/mswordes_PE
dc.formatapplication/epubes_PE
dc.language.isospaes_PE
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.rightsinfo:eu-repo/semantics/openAccesses_PE
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/4.0/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectBalance de líneaes_PE
dc.subjectSanitarioses_PE
dc.subjectLayoutes_PE
dc.subjectMétodoses_PE
dc.subjectEficienciaes_PE
dc.subjectLine balancinges_PE
dc.subjectSanitaryes_PE
dc.subjectLayoutes_PE
dc.subjectMethodses_PE
dc.subjectEfficiencyes_PE
dc.titlePropuesta de mejora de la eficiencia en los procesos de ensamble de sanitarios mediante la ingeniería de métodos y la planificación sistemática del layoutes_PE
dc.typeinfo:eu-repo/semantics/bachelorThesises_PE
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingenieríaes_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineIngeniería Industriales_PE
thesis.degree.nameIngeniero industriales_PE
refterms.dateFOA2022-09-28T16:52:25Z
dc.subject.ocdehttp://purl.org/pe-repo/ocde/ford#2.00.00es_PE
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.11.04es_PE
dc.identifier.isni0000 0001 2196 144X
renati.typehttps://purl.org/pe-repo/renati/type#trabajoDeSuficienciaProfesional
renati.advisor.orcidhttps://orcid.org/0000-0002-8634-9689es_PE
renati.levelhttps://purl.org/pe-repo/renati/level#tituloProfesionales_PE
renati.discipline722026es_PE
dc.publisher.countryPEes_PE
dc.type.otherTrabajo de suficiencia profesionales_PE


Files in this item

Thumbnail
Name:
Ferrer_RJ.pdf
Size:
4.270Mb
Format:
PDF
Thumbnail
Name:
Ferrer_RJ.docx
Embargo:
2092-09-28
Size:
5.811Mb
Format:
Microsoft Word 2007
Thumbnail
Name:
Ferrer_RJ_Ficha.pdf
Embargo:
2092-09-28
Size:
324.6Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess