Show simple item record

dc.contributor.advisorDurán Ramírez, Gary Gary
dc.contributor.advisorCárdenas Guillén, Jorge Luis
dc.contributor.authorPaucar Choque, Giancarlo
dc.contributor.authorCórdova Suero, José Alfredo
dc.date.accessioned2021-02-25T22:00:52Z
dc.date.available2021-02-25T22:00:52Z
dc.date.issued2021-01-12
dc.identifier.urihttp://hdl.handle.net/10757/654671
dc.description.abstractEl ángulo de fricción y la cohesión son parámetros de resistencia al corte establecidos por el modelo de Morh Coulomb, siendo estos necesarios para el diseño de estructuras geotécnicas utilizadas tanto en obras civiles como en obras mineras. Si durante la investigación geotécnica se concluye que las características de resistencia del material son menores a los requeridos, entonces es necesario realizar mejoras en terreno de fundación. Una de estas mejoras corresponde al uso de partículas PET, la misma que es mezclada con el suelo del terreno natural, obteniéndose un suelo con mejores características geotécnicas. El uso de las partículas PET como material de reforzamiento mecánico del suelo, nace de la necesidad técnica de obtener mejores características en el suelo y la búsqueda de reducir el impacto ambiental. La presente investigación busca encontrar el porcentaje óptimo de PET, que mejore el comportamiento geotécnico de un suelo gravoso arcilloso. Se preparó 5 probetas, donde se mezcló el suelo con porcentajes de 1%, 1.5%, 2%, 2.5% y 3 % de PET. Mediante el ensayo de corte directo se estimó la influencia del PET en la resistencia al corte del suelo. Los resultados obtenidos demuestran que el 2% de PET añadido a la grava arcillosa, aumenta la resistencia al corte en un 8.3% respecto al suelo sin refuerzo.en_US
dc.description.abstractThe angle of friction and cohesion are parameters of resistance to cutting that define the characteristics of the soil in civil works and buildings. If during the elaboration of a project, the soil does not comply with the necessary requirement, the way to improve or stabilize the soil to be used in the work is sought. The use of PET particles as a material for mechanical reinforcement of the soil, arises from the technical need to obtain better characteristics in the soil and the search to reduce the environmental impact. The present research seeks to find the optimal percentage of PET, which improves the geotechnical behavior of a clayey soil. Five test pieces were prepared, where the soil was mixed with percentages of 1%, 1.5%, 2%, 2.5% and 3% of PET. Through the direct cut test you will find the variation of the cut resistance generated by adding PET particles. The results obtained will be analyzed to understand the influence of the addition of recycled PET waste on the cut resistance of a clayey soil.en_US
dc.description.uriTesises_PE
dc.formatapplication/pdfen_US
dc.formatapplication/epuben_US
dc.formatapplication/msworden_US
dc.language.isospaen_US
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/4.0/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectSuelo gravosoen_US
dc.subjectPolietileno tereftlalatoen_US
dc.subjectPlástico recicladoen_US
dc.subjectBurdensome soilen_US
dc.subjectPolyethylene terephthalateen_US
dc.subjectRecycled plasticen_US
dc.titleEstudio experimental del comportamiento mecánico del suelo gravoso arcilloso reforzado con polietileno tereftlalato (PET) recicladoen_US
dc.title.alternativeExperimental study of the mechanical behavior of gravelly clay soil reinforced with recycled polyethylene terephthalate (PET)en_US
dc.typeinfo:eu-repo/semantics/bachelorThesisen_US
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingenieríaes_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineIngeniería Civiles_PE
thesis.degree.nameIngeniero Civiles_PE
refterms.dateFOA2021-03-16T21:46:44Z
dc.subject.ocdehttp://purl.org/pe-repo/ocde/ford#2.00.00en_US
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.01.01en_US
dc.identifier.isni0000 0001 2196 144X
renati.typehttp://purl.org/pe-repo/renati/type#tesises_PE
renati.advisor.orcidhttps://orcid.org/0000-0002-2011-7463en_US
renati.advisor.orcidhttps://orcid.org/0000-0002-8112-5168en_US
renati.levelhttps://purl.org/pe-repo/renati/level#tituloProfesionales_PE
renati.discipline732016es_PE
dc.publisher.countryPEes_PE
dc.type.otherTesises_PE


Files in this item

Thumbnail
Name:
PaucarC_G.pdf
Size:
2.290Mb
Format:
PDF
Thumbnail
Name:
PaucarC_G.docx
Embargo:
2091-01-12
Size:
2.389Mb
Format:
Microsoft Word 2007
Thumbnail
Name:
PaucarC_G_Ficha.pdf
Embargo:
2091-01-12
Size:
858.7Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess