Show simple item record

dc.contributor.advisorNuñez Ponce, Victor Hugo
dc.contributor.authorConde Muñasqui, Jennifer Lizzet
dc.contributor.authorGonzalez Vasquez, Denis Alexander
dc.date.accessioned2020-12-03T02:18:04Z
dc.date.available2020-12-03T02:18:04Z
dc.date.issued2020-11-13
dc.identifier.urihttp://hdl.handle.net/10757/653635
dc.description.abstractLa empresa en estudio perteneciente al sector de industria gráfica presentó un elevado número de devoluciones en el 2016 a comparación de otros años. El número de devoluciones fue de 67, donde cada una representa un lote de producción que fluctúa entre los 1000 a 10000 productos. Estas devoluciones generaron un gasto de 581,960 soles, el cual representa el 12.2% de las utilidades de ese año. Este problema está relacionado con la falta de capacitación, la elevada rotación de empleados, el retraso de mantenimiento preventivo, la falta de procedimiento y el desorden en las áreas de trabajo. El objetivo del trabajo fue reducir el elevado número de devoluciones con la aplicación de herramientas de la metodología Lean Manufacturing. La validación del proyecto fue mediante la implementación de un piloto en el área de acabado donde se implementaron las 5S, el TPM y el trabajo estandarizado, herramientas de la metodología mencionada. Los resultados obtenidos de la implementación del piloto, realizada entre los meses de enero a abril del 2018, fueron favorables para el proyecto. Las devoluciones se redujeron en un 28% y los gastos por devoluciones en un 47%, en comparación con los datos de enero a abril del 2016 y 2017.en_US
dc.description.abstractThe company under study belonging to the graphic industry sector presented a high number of returns in 2016 compared to other years. The number of returns was 67, each representing a production batch ranging from 1,000 to 10,000 products. These refunds generated an expense of 581,960 soles, which represents 12.2% of the profits for that year. This problem is related to lack of training, high employee turnover, delayed preventive maintenance, lack of procedures and disorder in work areas. The objective of the work was to reduce the high number of returns with the application of tools of the Lean Manufacturing methodology. The validation of the project was through the implementation of a pilot in the finishing area where the 5S, the TPM and the standardized work, tools of the aforementioned methodology, were implemented. The results obtained from the pilot implementation, carried out between January and April 2018, were favorable for the project. Returns were reduced by 28% and return expenses by 47%, compared to data from January to April 2016 and 2017.en_US
dc.description.uriTrabajo de Suficiencia Profesionales_PE
dc.formatapplication/pdfen_US
dc.formatapplication/msworden_US
dc.formatapplication/epuben_US
dc.language.isospaen_US
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/4.0/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectLean manufacturingen_US
dc.subject5Sen_US
dc.subjectTPMen_US
dc.subjectTrabajo estandarizadoen_US
dc.subjectDevolucionesen_US
dc.subjectStandardized Worken_US
dc.subjectReturnsen_US
dc.titleReducción del número de devoluciones en empresas del sector gráfico mediante la aplicación de herramientas del Pensamiento Esbeltoen_US
dc.title.alternativeReduction in the number of returns in companies in the Printing Sector through the Application of Lean Manufacturing Toolsen_US
dc.typeinfo:eu-repo/semantics/bachelorThesisen_US
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingenieríaes_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineIngeniería Industriales_PE
thesis.degree.nameIngeniero industriales_PE
refterms.dateFOA2021-01-06T15:39:10Z
dc.subject.ocdehttp://purl.org/pe-repo/ocde/ford#2.11.04en_US
dc.identifier.isni0000 0001 2196 144X
renati.typehttps://purl.org/pe-repo/renati/type#tesises_PE
renati.advisor.orcidhttps://orcid.org/0000-0002-1610-2533en_US
dc.type.otherTrabajo de suficiencia profesionales_PE


Files in this item

Thumbnail
Name:
Conde_MJ.pdf
Size:
5.306Mb
Format:
PDF
Thumbnail
Name:
Conde_MJ_Ficha.pdf
Embargo:
2090-11-13
Size:
572.4Kb
Format:
PDF
Thumbnail
Name:
Conde_MJ.docx
Embargo:
2070-11-13
Size:
30.14Mb
Format:
Microsoft Word 2007

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess