Estandarización del proceso de perforación y voladura en labores de exploración y desarrollo, mediante la aplicación de emulsiones y detonadores no eléctricos, en la Unidad Minera Santa Filomena de la Empresa Sotrami S.A.
Average rating
Cast your vote
You can rate an item by clicking the amount of stars they wish to award to this item.
When enough users have cast their vote on this item, the average rating will also be shown.
Star rating
Your vote was cast
Thank you for your feedback
Thank you for your feedback
Authors
Noreña Vasquez, Erle NeptalíAdvisors
Solis Sarmiento, HugoIssue Date
2020-09-24Keywords
Diseño de mallasEstandarización de procesos
Mallas de perforación
Detonadores no eléctricos
Sector minero
Ingeniería de Gestión Minera
Mesh design
Standardization of processes
Perforation meshes
Non-electric detonators
Mining sector
Mining Management Engineering
Metadata
Show full item recordDOI
http://doi.org/10.19083/tesis/653131Abstract
El presente trabajo de investigación busca implementar una metodología de diseño de mallas de perforación y voladura en la empresa Minera Sotrami S.A, perteneciente al rubro de pequeña minería, con fines de estandarizarlo. La ejecución de dicha investigación se realiza mediante la utilización del algoritmo matemático de Holmberg que permite definir un modelo numérico para el diseño de una malla de perforación, y con la consideración de criterios operacionales encontrar una malla técnica que permita mejorar los rendimientos en las labores de exploración y desarrollo. Para el logro del mismo, se consideró como variable fija el tipo de roca (tipo III A) y las características geomecánicas presentes en ella; el diámetro del taladro de perforación como variable fija; y, el tipo de explosivo y accesorio de voladura como cambiantes, ya que se reemplazó la utilización de guías, mecha de seguridad y dinamita por el empleo de detonadores no eléctricos (Exaneles) y emulsiones encartuchadas. La oportuna y pertinente estandarización del proceso de perforación y voladura permitió obtener los siguientes resultados: el avance por disparo pasó a 1.62 m, el factor de carga se redujo a 13.46 kg/m y el factor de potencia disminuyo considerablemente.This research work seeks to implement a design methodology for drilling and blasting meshes in the company Minera Sotrami S.A, belonging to the small mining sector, with finality to standardize it. This research is carried out by using the Holmberg mathematical algorithm that allows defining a numerical model for the design of a drilling mesh, and with the consideration of operational criteria, finding a technical mesh that allow improving the performance of exploration and development labors. To achieve it, the type of rock (type III - A) and the geomechanical characteristics present in it were considered as a fixed variable; the diameter of the drill as a fixed variable; the type blasting attachment and explosives as changeable, since the use of guides, safety wick and dynamite was replaced with the use of non electric detonators (Exaneles) and encapsulated emulsions. The opportune and pertinent standardization of the drilling and blasting process allowed obtaining the following results: the advance per shot was to 1.62 m, the load factor was reduced to 13.46 kg/m and the power factor decreased considerably.
Type
info:eu-repo/semantics/bachelorThesisRights
info:eu-repo/semantics/openAccessAttribution-NonCommercial-ShareAlike 4.0 International
Language
spaae974a485f413a2113503eed53cd6c53
http://doi.org/10.19083/tesis/653131
Scopus Count
Collections
The following license files are associated with this item:
- Creative Commons