Mostrar el registro sencillo del ítem

dc.contributor.advisorLlerena Cano, Donald Gustavo
dc.contributor.authorChavez Cervantes, Holmer Pitter
dc.contributor.authorPezo Irazabal, Anders
dc.date.accessioned2020-10-15T20:47:50Z
dc.date.available2020-10-15T20:47:50Z
dc.date.issued2020-08-23
dc.identifier.doihttp://doi.org/10.19083/tesis/653121es_PE
dc.identifier.urihttp://hdl.handle.net/10757/653121
dc.description.abstractLa presente investigación hace mención al análisis en laboratorio con respecto a la colocación de asfalto a una temperatura menor a seis grados centígrados, teniendo en consideración que el Perú cuenta con diferentes tipos de climas a lo largo y ancho de su territorio, esto hace que la producción de asfalto y su colocación sea una dificultad para cualquier tipo de proyecto de carreteras, la cual nos dirige a una realidad en la producción de asfalto en caliente, ya que sabiendo las normas y manuales con las que actualmente contamos hace que la colocación sea imposible a una temperatura menor a seis grados centígrados. La investigación se focaliza en un análisis cualitativo – cuantitativo la cual debe cumplir con los parámetros de calidad (Ensayos), manual de carreteras (EG - 2013) y proceso constructivo (método Marshall) la realización de la propuesta de mezcla asfáltica va a variar en el porcentaje de diferentes tipos de filler que hemos considerado para la investigación (cal, cemento portland tipo I y sílice). Para los ensayos se realizaron probetas sin ningún tipo de aditivos, las probetas una vez preparadas a 140ºC se sometieron a congelamiento dando como resultado, de los tres tipos de filler, que la mezcla asfáltica en caliente con incorporación de cemento portland tipo I a un 5,90% de cemento asfáltico es el óptimo cumpliendo con los parámetros y especificaciones técnicas del manual de carreteras.en_US
dc.description.abstractThe present investigation mentions the laboratory analysis regarding the placement of asphalt at a temperature below six degrees centigrade, taking into account that Peru has different types of climates throughout its territory, this makes the asphalt production and its placement is a difficulty for any type of road project, which leads us to a reality in the production of hot asphalt, since knowing the standards we currently have, that makes placement impossible to a temperature below six degrees centigrade. The research is focused on a qualitative - quantitative analysis which must comply with the quality parameters (Tests), road manual (EG - 2013) and constructive process (Marshall method) the realization of the asphalt mix proposal will vary in the percentage of different types of filler that we have considered for the research (lime, portland cement type I and silica). For the tests, test tubes were carried out without any type of additives, once the test tubes were prepared at 140ºC, they were subjected to freezing, resulting, of the three types of filler, that the hot asphalt mix with incorporation of portland cement type I at a 5,90% asphalt cement is the optimal one complying with the parameters and technical specifications of the road manual.en_US
dc.description.uriTesises_PE
dc.formatapplication/pdfen_US
dc.formatapplication/epuben_US
dc.formatapplication/msworden_US
dc.language.isospaen_US
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/4.0/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectManual de carretasen_US
dc.subjectManual técnico de construcciónen_US
dc.subjectDiseño de mezcla asfálticaen_US
dc.subjectAsfaltoen_US
dc.subjectMetodología Marshallen_US
dc.subjectCart manualen_US
dc.subjectTechnical construction manualen_US
dc.subjectAsphalt mix designen_US
dc.subjectAsphalten_US
dc.subjectMarshall Methodologyen_US
dc.titlePropuesta Teórica de Diseño de Mezcla Asfáltica en Caliente producida a Temperatura Ambiente Menor a Seis Grados Centígrados en Perúen_US
dc.title.alternativeTheoretical proposal of design of hot asphalt mix produced at a room temperature below six degrees centigrade in peruen_US
dc.typeinfo:eu-repo/semantics/bachelorThesisen_US
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingenieríaes_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineIngeniería Civiles_PE
thesis.degree.nameIngeniero Civiles_PE
refterms.dateFOA2020-10-31T02:41:29Z
dc.identifier.isni0000 0001 2196 144X
renati.typehttp://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttp://purl.org/pe-repo/renati/nivel#tituloProfesionales_PE
dc.publisher.countryPEes_PE
dc.type.otherTesises_PE


Ficheros en el ítem

Thumbnail
Nombre:
Chavez_CH.pdf
Tamaño:
5.493Mb
Formato:
PDF
Thumbnail
Nombre:
Chavez_CH.docx
Embargo:
2090-08-23
Tamaño:
11.50Mb
Formato:
Microsoft Word 2007
Thumbnail
Nombre:
Chavez_CH_Ficha.pdf
Embargo:
2090-08-23
Tamaño:
81.75Kb
Formato:
PDF

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

info:eu-repo/semantics/openAccess
Excepto si se señala otra cosa, la licencia del ítem se describe como info:eu-repo/semantics/openAccess