Show simple item record

dc.contributor.advisorHuaco Cárdenas, Guillermo David
dc.contributor.authorQuezada Ramos, Eder Nel
dc.contributor.authorSerrano Arone, Yaneth
dc.date.accessioned2020-08-30T06:02:53Z
dc.date.available2020-08-30T06:02:53Z
dc.date.issued2020-08-03
dc.identifier.citationhttp://doi.org/10.19083/tesis/652570es_PE
dc.identifier.urihttp://hdl.handle.net/10757/652570
dc.description.abstractLa presente investigación propone un procedimiento alternativo de análisis para edificios altos sobre la base de los requerimientos de la Norma Peruana E.030. Primero, se definen las configuraciones estructurales de los edificios a desarrollar, se delimita el número de edificios y la cantidad de niveles, así como el sistema estructural predominante. Luego, se precisan las características de los materiales, las cargas y las combinaciones. Los casos de estudio que se desarrollan se basan en edificaciones altas peruanas existentes como el Hotel Westin Libertador y el Banco de la Nación. Para la configuración estructural se utilizó el sistema estructural de núcleo rígido debido a su gran versatilidad y funcionalidad. Después, se describen los métodos de análisis de estructuras altas y se procede con el análisis de la verificación de derivas y realizar una comparación de la cortante en la base mediante el análisis estático, análisis dinámico modal espectral y análisis lineal tiempo historia. Para el análisis tiempo historia se emplearon cinco registros sísmicos peruanos, mientras que para el diseño de las placas de concreto armado se usó el análisis modal espectral. Asimismo, se analizaron los valores de los ratios de la cortante basal. Finalmente, se propuso un valor de C/R para cada tipo de edificación.en_US
dc.description.abstractThe present investigation proposes an alternative analysis procedure for tall buildings based on the requirements of Peruvian Standard E.030. First, the structural configurations of the buildings to be developed are defined, the number of buildings and the number of levels are delimited, as well as the predominant structural system. Then, the characteristics of the materials, loads and combinations are specified. The case studies that are carried out are based on existing Peruvian tall buildings such as the Westin Libertador Hotel and the Banco de la Nación. For the structural configuration, the rigid core structural system was used due to its great versatility and functionality. Afterwards, the methods of analysis of tall structures are described and we proceed with the analysis of the verification of drifts and make a comparison of the shear at the base using static analysis, dynamic spectral modal analysis and linear time history analysis. For the time-history analysis, five Peruvian seismic records were used, while the spectral modal analysis was used to design the reinforced concrete plates. Likewise, the values of the basal shear ratios were analyzed. Finally, a C / R value was proposed for each type of building.en_US
dc.description.uriTesises_PE
dc.formatapplication/pdfen_US
dc.formatapplication/epuben_US
dc.formatapplication/msworden_US
dc.language.isospaen_US
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/4.0/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectAnálisis dinámicoen_US
dc.subjectNúcleo rígidoen_US
dc.subjectFactor de amplificación dinámicaen_US
dc.subjectNorma Peruana E.030en_US
dc.subjectDynamic analysisen_US
dc.subjectDynamic Amplifiticaon Factoren_US
dc.subjectPeruvian Seismic Code E.030en_US
dc.titleComparación de valores de C/R mínimo de la Norma Peruana E.030 para el Diseño Sismorresistente de edificios altos y su propuesta de modificación con sistema estructural núcleo rígido mediante análisis tiempo-historia en la ciudad de Limaen_US
dc.typeinfo:eu-repo/semantics/bachelorThesisen_US
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingenieríaes_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineIngeniería Civiles_PE
thesis.degree.nameIngeniero Civiles_PE
refterms.dateFOA2020-09-10T02:28:52Z
dc.identifier.isni0000 0001 2196 144X
renati.typehttp://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttp://purl.org/pe-repo/renati/nivel#tituloProfesionales_PE
dc.publisher.countryPEes_PE
dc.type.otherTesises_PE


Files in this item

Thumbnail
Name:
Quezada_RE.pdf
Size:
2.999Mb
Format:
PDF
Thumbnail
Name:
Quezada_RE.docx
Embargo:
2090-08-03
Size:
4.321Mb
Format:
Microsoft Word 2007
Thumbnail
Name:
Quezada_RE_Ficha.pdf
Embargo:
2090-08-03
Size:
1.544Mb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess