Show simple item record

dc.contributor.advisorEyzaguirre Acosta, Carlos Augusto
dc.contributor.authorAliaga Campos, Susana
dc.contributor.authorGonzales Orihuela, Eugenia María
dc.date.accessioned2020-03-22T00:34:35Z
dc.date.available2020-03-22T00:34:35Z
dc.date.issued2020-03-05
dc.identifier.urihttp://hdl.handle.net/10757/651586
dc.description.abstractEl adobe es un material de construcción que ha sido empleado tanto en países desarrollados como no desarrollados. En el caso del Perú, el uso de este material es muy empleado en zonas altoandinas y de bajos recursos, pese al elevado índice de viviendas construidos con este material, los principales problemas se ven reflejados en la baja resistencia y la durabilidad. Según estudios de investigación, la adición de refuerzos mejora la resistencia a la tracción de los elementos de adobe disminuyendo la aparición de fisuras retardando los colapsos ante movimientos telúricos. Por este motivo, el presente trabajo tiene como finalidad presentar una propuesta sostenible y económica para el refuerzo a base de fibras naturales de maguey que mejore la resistencia de muros de viviendas de adobe haciendo uso de la norma E.080 (Diseño y Construcción con Tierra Reforzada). Para evaluar los parámetros mecánicos de la propuesta, se realizaron ensayos de tracción a diversos prototipos de mallas biaxiales con aberturas cuadradas espaciadas, de los cuales las características que variaron fueron espaciamientos y diámetros de cuerdas. Como resultado, el prototipo que resistió mayores cargas fue el de dimensiones de 2.00 m x 0.70 de ancho y largo respectivamente, y con aberturas cuadradas espaciadas cada 2 centímetros, con cuerdas de diámetro de 5 milímetros. Estos revestirán los muros de viviendas de adobe interna y externamente con el fin de asegurar la compatibilidad de ambos elementos para resistir los esfuerzos, donde las mallas tomarán las tracciones y los muros de adobe las compresiones. La resistencia a tracción es de 5.0KN/m.en_US
dc.description.abstractAdobe is a construction material that has been used in both developed and non-developed countries. In the case of Peru, the use of this material is widely used in high Andean and low-resource areas, despite the high rate of housing built with this material, the main problems are reflected in low resistance and durability. According to research studies, the addition of reinforcements improves the tensile strength of the adobe elements, decreasing the appearance of fissures, delaying collapses in the face of telluric movements. For this reason, the present work aims to present a sustainable and economic proposal for reinforcement based on natural maguey fibers that improve the strength of adobe housing walls using the E.080 standard (Design and Construction with Reinforced Earth). To evaluate the mechanical parameters of the proposal, tensile tests were carried out on several prototypes of biaxial meshes with spaced square openings, of which the characteristics that varied were spacing and diameters of ropes. As a result, the prototype that withstood the heaviest loads was the dimensions of 2.00 m x 0.70 in width and length respectively, and with square openings spaced every 2 centimeters, with ropes of 5 mm diameter. These will cover the walls of adobe houses internally and externally in order to ensure the compatibility of both elements to resist the efforts, where the meshes will take the tractions and the adobe walls the compressions. The tensile strength is 5.0 KN / m.en_US
dc.description.uriTesises_PE
dc.formatapplication/pdfen_US
dc.formatapplication/epuben_US
dc.formatapplication/msworden_US
dc.language.isospaen_US
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/4.0/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectAdobeen_US
dc.subjectMateriales de construcciónen_US
dc.subjectConstrucción antisísmicaen_US
dc.subjectConstruction materialsen_US
dc.titlePropuesta de mallas de fibras de maguey para mejorar la resistencia de muros de adobe en el distrito de Colcabamba - Huancavelicaen_US
dc.typeinfo:eu-repo/semantics/bachelorThesisen_US
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingenieríaes_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineIngeniería Civiles_PE
thesis.degree.nameIngeniero Civiles_PE
refterms.dateFOA2020-03-22T00:34:36Z
dc.identifier.isni0000 0001 2196 144X
renati.typehttp://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttp://purl.org/pe-repo/renati/nivel#tituloProfesionales_PE
dc.publisher.countryPEes_PE
dc.type.otherTesises_PE


Files in this item

Thumbnail
Name:
Aliaga_CS.pdf
Size:
3.417Mb
Format:
PDF
Thumbnail
Name:
Aliaga_CS.docx
Embargo:
2090-03-05
Size:
9.953Mb
Format:
Microsoft Word 2007
Thumbnail
Name:
Aliaga_CS_Ficha.pdf
Embargo:
2090-03-05
Size:
2.133Mb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess