Propuesta de mallas de fibras de maguey para mejorar la resistencia de muros de adobe en el distrito de Colcabamba - Huancavelica
Average rating
Cast your vote
You can rate an item by clicking the amount of stars they wish to award to this item.
When enough users have cast their vote on this item, the average rating will also be shown.
Star rating
Your vote was cast
Thank you for your feedback
Thank you for your feedback
Advisors
Eyzaguirre Acosta, Carlos AugustoIssue Date
2020-03-05
Metadata
Show full item recordAbstract
El adobe es un material de construcción que ha sido empleado tanto en países desarrollados como no desarrollados. En el caso del Perú, el uso de este material es muy empleado en zonas altoandinas y de bajos recursos, pese al elevado índice de viviendas construidos con este material, los principales problemas se ven reflejados en la baja resistencia y la durabilidad. Según estudios de investigación, la adición de refuerzos mejora la resistencia a la tracción de los elementos de adobe disminuyendo la aparición de fisuras retardando los colapsos ante movimientos telúricos. Por este motivo, el presente trabajo tiene como finalidad presentar una propuesta sostenible y económica para el refuerzo a base de fibras naturales de maguey que mejore la resistencia de muros de viviendas de adobe haciendo uso de la norma E.080 (Diseño y Construcción con Tierra Reforzada). Para evaluar los parámetros mecánicos de la propuesta, se realizaron ensayos de tracción a diversos prototipos de mallas biaxiales con aberturas cuadradas espaciadas, de los cuales las características que variaron fueron espaciamientos y diámetros de cuerdas. Como resultado, el prototipo que resistió mayores cargas fue el de dimensiones de 2.00 m x 0.70 de ancho y largo respectivamente, y con aberturas cuadradas espaciadas cada 2 centímetros, con cuerdas de diámetro de 5 milímetros. Estos revestirán los muros de viviendas de adobe interna y externamente con el fin de asegurar la compatibilidad de ambos elementos para resistir los esfuerzos, donde las mallas tomarán las tracciones y los muros de adobe las compresiones. La resistencia a tracción es de 5.0KN/m.Adobe is a construction material that has been used in both developed and non-developed countries. In the case of Peru, the use of this material is widely used in high Andean and low-resource areas, despite the high rate of housing built with this material, the main problems are reflected in low resistance and durability. According to research studies, the addition of reinforcements improves the tensile strength of the adobe elements, decreasing the appearance of fissures, delaying collapses in the face of telluric movements. For this reason, the present work aims to present a sustainable and economic proposal for reinforcement based on natural maguey fibers that improve the strength of adobe housing walls using the E.080 standard (Design and Construction with Reinforced Earth). To evaluate the mechanical parameters of the proposal, tensile tests were carried out on several prototypes of biaxial meshes with spaced square openings, of which the characteristics that varied were spacing and diameters of ropes. As a result, the prototype that withstood the heaviest loads was the dimensions of 2.00 m x 0.70 in width and length respectively, and with square openings spaced every 2 centimeters, with ropes of 5 mm diameter. These will cover the walls of adobe houses internally and externally in order to ensure the compatibility of both elements to resist the efforts, where the meshes will take the tractions and the adobe walls the compressions. The tensile strength is 5.0 KN / m.
Type
info:eu-repo/semantics/bachelorThesisRights
info:eu-repo/semantics/openAccessAttribution-NonCommercial-ShareAlike 4.0 International
Language
spaCollections
The following license files are associated with this item:
- Creative Commons