Evaluación de la influencia de distintos grados de acero de refuerzo en el desempeño sísmico de edificaciones aporticadas con análisis estático no lineal
Average rating
Cast your vote
You can rate an item by clicking the amount of stars they wish to award to this item.
When enough users have cast their vote on this item, the average rating will also be shown.
Star rating
Your vote was cast
Thank you for your feedback
Thank you for your feedback
Advisors
Orihuela Dávila, Junior DidiIssue Date
2020-02-04
Metadata
Show full item recordOther Titles
Evaluation of the influence of different grades of reinforcing steel on the seismic performance of buildings provided with nonlinear static analysisAbstract
En esta investigación, se evalúa el comportamiento elasto- plástico y el desempeño sísmico de estructuras aporticadas aplicando el método Pushover. Esta evaluación se hace sobre diversos casos de edificios reforzados con acero de alta ductilidad (Grado 40), acero convencional (Grado 60) y acero de alta resistencia (Grado 75).Para lo anterior, se realiza la evaluación de la capacidad de deformación de los elementos estructurales a partir de las gráficas de momento-rotación de los elementos estructurales más críticos que causa el colapso de la estructura. También, se utilizó la gráfica de curva de capacidad obtenida a partir del método de coeficientes de desplazamiento para medir la capacidad de la estructura. Teniendo en cuenta los valores resultantes de ductilidad y rigidez de cada caso, se evalúa el desempeño de la estructura para diferentes niveles de diseño sísmico. Los resultados mostraron que reforzar una estructura con un acero de Grado 40 aumenta la capacidad de disipación de energía, y si se refuerza con acero de grado 75 aumenta la capacidad de resistencia en la estructura. Finalmente, se presenta el resultado comparativo de los diversos casos para demostrar la influencia del acero de refuerzo en el comportamiento plástico de las estructuras de concreto armado.In this investigation, the elasto-plastic behavior and the seismic performance reinforced structures by applying the Pushover method. This evaluation is done on several cases: with high ductility steel (Grade 40), conventional steel (Grade 60) and high strength steel (Grade 75). For the previous, the evaluation of the deformability of the structural elements is made from the moment-rotation graphs that cause the structure to collapse. The capacity curve graph obtained from the displacement coefficient method was used to measure the capacity of the structure. In addition, the performance of the structure for different levels of seismic design are evaluated with the resulting values of ductility and rigidity of each case. The results showed that reinforcing a structure with a Grade 40 reinforcing steel increases the energy dissipation capacity, and if reinforced with a Grade 75 reinforcing steel increases the strength capacity in the structure. Finally, the comparative result of the various cases are presented to demonstrate the influence of reinforcing steel on the plastic behavior of reinforced concrete structures.
Type
info:eu-repo/semantics/bachelorThesisRights
info:eu-repo/semantics/openAccessAttribution-NonCommercial-ShareAlike 4.0 International
Language
spaCollections
The following license files are associated with this item:
- Creative Commons