Show simple item record

dc.contributor.advisorArauzo Gallardo, Luis Alberto
dc.contributor.authorDiaz Bustamante, Gianlucas Wanderley
dc.contributor.authorSotelo Molero, Cesar David
dc.date.accessioned2020-01-14T19:33:35Z
dc.date.available2020-01-14T19:33:35Z
dc.date.issued2019-11-12
dc.identifier.urihttp://hdl.handle.net/10757/629960
dc.description.abstractEn la presente tesis se estudia la aplicación de los principios matemáticos de Holmberg y sus colaboradores. Dichos principios se encuentran descritos en el libro Rock blasting and explosives engineering que tiene como finalidad demostrar de manera práctica la importancia de realizar un adecuado diseño de la malla de perforación y voladura. Esto se llevó acabo, en primer lugar, con el mapeo geomecánico (RMR), el análisis del arranque a utilizar, así como la longitud de barrenos y el explosivo óptimo para el cebo y la columna de carga. Esta investigación se realizó en la Unidad Minera Santa María de Compañía Minera Poderosa S.A., donde se demostró que el cambio de diámetro en los taladros de alivio del arranque de 38 mm a 64 mm y el uso adicional de barrenos de 8 pies para la sección de 2.5 m x 2.7 m, contribuye a ser eficientes en cada disparo. En esta misma instancia, se demostró que, aplicando de manera óptima los principios matemáticos utilizados se puede reducir notablemente la cantidad del uso de explosivos, viéndose reflejado en un ahorro económico por disparo. Los resultados obtenidos con el nuevo diseño son: el factor de potencia pasó de 1.23 a 1.15 kg/t reduciendo un 6.8 %, el avance por disparo de 1.51 a 2.10 m aumentando un 39.2 % y el factor de carga lineal de 23.24 a 21.02 kg/m reduciendo un 9.6 %; lo cual se traduce en un ahorro mensual por frente de trabajo de S/. 21,421.12.en_US
dc.description.abstractThis thesis explores the application of the mathematical principles of Holmberg and his collaborators.These principles are described in the book Rock blasting and explosives engineering which aims to demonstrate in a practical way the importance of proper drilling and blasting mesh design. This was completed, first of all, with geomechanical mapping (RMR), analysis of the start to be used, as well as the length of holes and the optimal explosive for the bait and the loading column. This research was carried out at the Santa María Mining Unit of Compañía Minera Poderosa S.A., where it was shown that the diameter change in the starter relief drills from 38 mm to 64 mm and the additional use of 8-foot holes for the 2.5 m x 2.7 m section, contributes to being efficient in every shot. In this same instance, it was demonstrated that, optimally applying the mathematical principles used the amount of explosives use can be significantly reduced, reflected in economic savings per shot. The results obtained with the new design are: the power factor went from 1.23 to 1.15 kg/t reducing a 6.8 %, the advance per shot from 1.51 to 2.10 m increasing a 39.2 % and the linear load factor from 23.24 to 21.02 kg/m reducing a 9.6 %; which translates into a monthly savings on the work front of S/. 21,421.12.en_US
dc.description.uriTesises_PE
dc.formatapplication/pdfen_US
dc.formatapplication/epuben_US
dc.formatapplication/msworden_US
dc.language.isospaen_US
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/4.0/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectGestión mineraen_US
dc.subjectMineríaen_US
dc.subjectCompañía Minera Poderosaen_US
dc.subjectMining managementen_US
dc.subjectMiningen_US
dc.titleOptimización del avance lineal en las labores de exploración y desarrollo de la Unidad Minera Santa María - Compañía Minera Poderosa S.A. con la aplicación de los criterios fundamentales de la ingeniería de la voladuraen_US
dc.typeinfo:eu-repo/semantics/bachelorThesisen_US
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingenieríaes_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineIngeniería Mineraes_PE
thesis.degree.nameIngeniero de Gestión Mineraes_PE
refterms.dateFOA2020-01-21T18:43:17Z
dc.identifier.isni0000 0001 2196 144X
renati.typehttp://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttp://purl.org/pe-repo/renati/nivel#tituloProfesionales_PE
dc.publisher.countryPEes_PE
dc.type.otherTesises_PE


Files in this item

Thumbnail
Name:
Diaz_BG.pdf
Size:
4.272Mb
Format:
PDF
Thumbnail
Name:
Diaz_BG.docx
Embargo:
2089-11-12
Size:
8.635Mb
Format:
Microsoft Word 2007
Thumbnail
Name:
Diaz_BG_Ficha.pdf
Embargo:
2089-11-12
Size:
94.96Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess