Show simple item record

dc.contributor.advisorVíctor Hugo, Núñez Ponce
dc.contributor.authorCesar Iván, Cuba Núñez*
dc.date.accessioned2019-06-13T20:24:10Z
dc.date.available2019-06-13T20:24:10Z
dc.date.issued2018-01-22
dc.identifier.citation[1] C. N. Cesar Iván, “Propuesta de mejora para incrementar la disponibilidad de los equipos en el proceso de teñido, a través de un plan de mantenimiento en una empresa textil peruana,” Universidad Peruana de Ciencias Aplicadas (UPC), Lima, Perú, 2018.es_PE
dc.identifier.doi10.19083/tesis/625854es_PE
dc.identifier.urihttp://hdl.handle.net/10757/625854
dc.description.abstractEl sector textil y confecciones es uno de los sectores con mayores expectativas de crecimiento sostenible de la industria y uno de los que mayor competencia acumula con otros países del sector internacional. Este sector abarca diferentes tipos de procesos, que van desde tratamiento de fibras, hilatura, tejido y confección. El presente análisis recae sobre la baja disponibilidad que presenta los equipos en el proceso de teñido. Este proceso se mide a partir de los reprocesos que existen debido a que se ejecuta mantenimientos correctivos, el cual afecta la producción en el teñido de telas. Asimismo, se logra evaluar el tiempo promedio entre fallas (MTBF) y el tiempo promedio de reparación (MTTR), lo que indica la variabilidad por debajo del objetivo esperado por la organización. Por otro lado, en el tercer capítulo se desarrolla le propuesta de mejora a partir del desarrollo del estado del arte del primer capítulo. Para ello se propone la metodología da seguir de acuerdo con una combinación de RCM y TPM. Bajo esta metodología se desarrolla diferentes actividades y estrategias que permitirán detectar equipos críticos e implementar planes de mantenimiento preventivo mecánico y eléctrico. Además, se incluye como parte de este sistema la implementación de un mantenimiento basado en condición (predictivo) y autónomo. Finalmente, el tercer capítulo finaliza con el soporte de la metodología 5 ‘’S’’ y la evaluación económica a partir de la estructura de costos que tiene prevista el proyecto. Finalmente, en el capítulo cuatro se presenta la validación de la propuesta de mejora a partir de la validación de los resultados en el software Arena. Ello permite concluir que los indicadores MTTR y MTBF ha logrado alcanzar los objetivos presentados en la propuesta.en_US
dc.description.abstractThe textile and garment sector is one of the sectors with the highest expectations of sustainable growth in the industry and one of the sectors with the highest competition with other countries in the international sector. This sector covers different types of processes, ranging from fiber treatment, spinning, weaving and confection. The present analysis falls on the low availability that presents the equipment in the process of dyeing. This process is measured from the reprocesses that exist due to the execution of corrective maintenance, which affects the production of fabric dyeing. Likewise, it is possible to evaluate the average time between failures (MTBF) and the average repair time (MTTR), which indicates the variability below the target expected by the organization. On the other hand, in the third chapter the improvement proposal is developed from the development of the state of art of the first chapter. For this, the methodology to be followed is proposed according to a combination of RCM and TPM. Under this methodology, different activities and strategies are developed to detect critical equipment and implement mechanical and electrical preventive maintenance plans. In addition, the implementation of a maintenance based on (predictive) and autonomous condition is included as part of this system. Finally, the third chapter ends with the support of the 5 '' S '' methodology and the economic evaluation based on the cost structure planned by the project. Finally, chapter four presents the validation of the improvement proposal based on the validation of the results in the Arena software. This allows concluding that the MTTR and MTBF indicators have achieved the objectives presented in the proposal.es_PE
dc.description.uriTesises_PE
dc.formatapplication/pdfen_US
dc.formatapplication/epuben_US
dc.formatapplication/msworden_US
dc.language.isospaen_US
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectIndustria textilen_US
dc.subjectGestión de mantenimientoen_US
dc.subjectMantenimiento centrado en la confiabilidaden_US
dc.subjectMantenimiento productivo totalen_US
dc.subjectMetodología 5sen_US
dc.subjectTextile industryes_PE
dc.subjectMaintenance managementes_PE
dc.subjectReliability centred maintenancees_PE
dc.subjectTotal productive maintenancees_PE
dc.subject5s methodologyes_PE
dc.titlePropuesta de mejora para incrementar la disponibilidad de los equipos en el proceso de teñido, a través de un plan de mantenimiento en una empresa textil peruanaen_US
dc.title.alternativeImprovement proposal to increase the availability of equipment in the dyeing process, through a maintenance plan in a Peruvian textile companyes_PE
dc.typeinfo:eu-repo/semantics/bachelorThesisen_US
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingenieríaes_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineIngeniería Industriales_PE
thesis.degree.nameIngeniero industriales_PE
refterms.dateFOA2019-06-23T13:46:06Z
dc.identifier.isni0000 0001 2196 144X
renati.typehttp://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttp://purl.org/pe-repo/renati/nivel#tituloProfesionales_PE
dc.publisher.countryPEes_PE
dc.type.otherTesises_PE


Files in this item

Thumbnail
Name:
Cuba_nc.pdf
Size:
4.086Mb
Format:
PDF
Thumbnail
Name:
Cuba_nc.docx
Embargo:
2089-01-22
Size:
5.557Mb
Format:
Microsoft Word 2007
Thumbnail
Name:
Cuba_nc_ficha.pdf
Embargo:
2089-01-22
Size:
92.08Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess