Mostrar el registro sencillo del ítem

dc.contributor.advisorLeón Tenicela, Rolando Alberto
dc.contributor.authorNarváez García, Priscila Melina*
dc.contributor.authorVega Rivera, Brigdy Lucero*
dc.date.accessioned2019-06-07T00:24:23Z
dc.date.available2019-06-07T00:24:23Z
dc.date.issued2019-02-15
dc.identifier.citationNarváez García, P. M., & Vega Rivera, B. L. (2019). Tratamiento tributario de la disminución del costo histórico por la aplicación de la NIC 16, y su impacto en la determinación del Impuesto a la Renta en el sector metalmecánico durante el periodo 2014-2017. Universidad Peruana de Ciencias Aplicadas (UPC), Lima, Perú. https://doi.org/10.19083/tesis/625846es_PE
dc.identifier.doi10.19083/tesis/625846
dc.identifier.urihttp://hdl.handle.net/10757/625846
dc.description.abstractLa presente investigación está vinculada a un análisis realizado dentro del sector industrial, concretamente la industria metalmecánica, ya que representa aproximadamente el 13% del Producto Bruto Interno (PBI), de acuerdo con el Instituto Nacional de Estadística e Informática (INEI). Asimismo, debido a que las empresas que pertenecen a este sector se encargan de la producción de bienes a través de la conversión de materia prima, cuentan con un alto porcentaje de bienes del activo fijo con respecto a los activos totales. Por otro lado, la Superintendencia Nacional de Administración Tributaria (SUNAT), durante los años 2014 y 2016, fue cuestionada por los contribuyentes respecto a si la depreciación relacionada a los activos revaluados o devaluados podría ser regularizada vía declaración jurada. Lo que indicó la SUNAT mediante los Informes N° 025-2014-SUNAT/4B0000 y N° 0120-2016-SUNAT/5D0000 es que los ajustes al costo que determinen mayor valor resultante no serán aceptados para el cálculo de la depreciación; en cambio, si dichos ajustes determinan un menor valor resultante, la única depreciación que se podrá deducir tributariamente es la contabilizada. Las empresas que adoptaron NIIF deben realizar revaluaciones periódicas, según lo señalado por la norma contable (NIC 16); lo que conlleva a que el costo de la propiedad, planta y equipo sea mayor o menor al costo histórico. Dicho esto, y según lo mencionado líneas arriba, se puede concluir que el caso que más afectaría a los contribuyentes sería el vinculado a una disminución del costo histórico por medición posterior de los activos fijos. En esta investigación, analizaremos el tratamiento tributario de la disminución del valor de adquisición de los elementos de la propiedad, planta y equipo; y su impacto en la determinación del Impuesto a la Renta como variable dependiente.en_US
dc.description.abstractThe present investigation "Tax treatment of the historical cost reduction of the application of IAS 16, and its impact on the determination of Income Tax in the metalworking sector, during the 2014-2017 period", is linked to an analysis carried out within the industrial sector, specifically the metal-mechanic industry, since it represents 13% of the Gross Domestic Product (GDP), the agreement with the National Institute of Statistics and Informatics (INEI). Also, because the companies that belong to this sector are responsible for the production of goods through the conversion of raw materials, they have a high percentage of active assets with respect to total assets. On the other hand, the National Superintendency of Tax Administration (SUNAT), during the years 2014 and 2016, was questioned by the taxpayers in relation to the depreciation of the revalued or devalued assets, which could deduct the sworn via. What SUNAT indicated through Reports No. 025-2014-SUNAT / 4B0000 and No. 0120-2016-SUNAT / 5D0000 is that the cost adjustments that determine the highest value are not those accepted for the calculation of depreciation. The only depreciation that can be tax deductible is the one recorded. Companies that adopted IFRS must perform periodic revaluations, as indicated by the accounting standard (IAS 16); what entails the cost of property, plant and equipment greater or lesser sea at historical cost. This is explained by the name of the line above. In this investigation, we will analyze the tax treatment of the decrease in the value of the acquisition of the elements of property, plant and equipment; And its impact on the determination of income tax as a dependent variable.en_US
dc.description.uriTesises_PE
dc.formatapplication/pdfen_US
dc.formatapplication/msworden_US
dc.formatapplication/epuben_US
dc.language.isospaen_US
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectPrincipios y normas de información financieraen_US
dc.subjectImpuesto a la rentaen_US
dc.subjectDepreciaciónen_US
dc.subjectIndustria metalmecánicaen_US
dc.subjectActivo fijoen_US
dc.subjectEmpresas industrialesen_US
dc.subjectContabilidaden_US
dc.titleTratamiento tributario de la disminución del costo histórico por la aplicación de la NIC 16, y su impacto en la determinación del Impuesto a la Renta en el sector metalmecánico durante el periodo 2014-2017en_US
dc.title.alternativeTax treatment of the historical cost reduction of the application of IAS 16, and its impact on the determination of Income Tax in the metalworking sector, during the 2014-2017 perioden_US
dc.typeinfo:eu-repo/semantics/bachelorThesisen_US
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). Facultad de Negocioses_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineContabilidad y Administraciónes_PE
thesis.degree.nameLicenciado en Contabilidades_PE
refterms.dateFOA2019-06-07T00:24:24Z
dc.identifier.isni0000 0001 2196 144X
renati.typehttp://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttp://purl.org/pe-repo/renati/nivel#tituloProfesionales_PE
dc.publisher.countryPEes_PE
dc.type.otherTesises_PE


Ficheros en el ítem

Thumbnail
Nombre:
Narváez_gp.pdf
Tamaño:
2.373Mb
Formato:
PDF
Thumbnail
Nombre:
Narváez_gp.epub
Tamaño:
1.955Mb
Formato:
application/epub
Thumbnail
Nombre:
Narváez_gp.docx
Embargo:
2089-02-15
Tamaño:
1.023Mb
Formato:
Microsoft Word 2007
Thumbnail
Nombre:
Narváez_gp_ficha.pdf
Embargo:
2089-02-15
Tamaño:
89.62Kb
Formato:
PDF

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

info:eu-repo/semantics/openAccess
Excepto si se señala otra cosa, la licencia del ítem se describe como info:eu-repo/semantics/openAccess