Show simple item record

dc.contributor.advisorEyzaguirre Munarriz, Juan Carlos
dc.contributor.authorMiranda Roque, Peter Hugo*
dc.contributor.authorTorres Zevallos, Richard Omar*
dc.date.accessioned2019-01-10T18:28:03Z
dc.date.available2019-01-10T18:28:03Z
dc.date.issued2018-11-15
dc.identifier.citation[1] P. H. Miranda Roque and R. O. Torres Zevallos, “Propuesta de mejora del proceso de reparación de equipos aplicando Lean Manufacturing en una empresa de renta de maquinaria para construcción y minería,” Universidad Peruana de Ciencias Aplicadas(UPC)., Lima, Perú, 2018. Doi: http://doi.org/10.19083/tesis/624830
dc.identifier.doi10.19083/tesis/624830es_PE
dc.identifier.urihttp://hdl.handle.net/10757/624830
dc.description.abstractLa investigación del presente documento tuvo como objetivo mejorar el proceso de reparación de equipos pesados. Lean manufacturing fue la base técnica del estudio, estas herramientas surgen de la filosofía japonesa que pretende eliminar todo tipo de desperdicio que se presenta en las distintas etapas de los procesos con la finalidad de tener procesos limpios y eficientes, bajo los dos pilares que ejerce la empresa, seguridad y calidad. Este trabajo muestra el proceso de análisis de identificación de las causas raíz del problema dentro del proceso de reparación, y busca proponer una solución alternativa para la empresa en estudio. Se detalla la información teórica necesaria para entender las etapas del proceso de reparación de equipos pesados, así también, se indica una breve descripción de la empresa y de su proceso de producción. Se utilizó el VSM para la definición del proceso a evaluar, la elección de los parámetros de medición, y el análisis de base datos de registro de la empresa en el año 2017 y hasta julio 2018; para poder identificar las causas raíz que originan la demora en la entrega de equipos reparados, y proponer una alternativa de solución que mejore el nivel de cumplimiento de entrega a tiempo y satisfacer la demanda actual. Esta alternativa está basada en la utilización de herramientas de balance de línea y heijunka para la eliminación de mudas. Finalmente, se han calculado el VAN y TIR para determinar la viabilidad de la inversión de la propuesta de mejora.en_US
dc.description.abstractThe purpose of the investigation of this document was to improve the repair process of heavy equipment. The lean manufacturing was the technical basis of this study; these tools arise from the Japanese philosophy that tries to eliminate the type of waste that occurs in the different stages of the processes in order to have clean and efficient processes, under the two pillars that exercises the company, safety and quality. This work shows the process of analyzing the identification of the root causes of a problem within a repair process andman seeks an alternative solution for the company in the study. The theoretical information is detailed to understand the stages of a process of repairing heavy equipment, as well as a brief description of the company and its production process. The VSM is used for the definition of the evaluation process, the choice of measurement parameters, and the analysis of the company database in the year 2017 and until July 2018; to be able to identify the root causes that originate the delay in the delivery of repaired equipment, and propose a solution alternative to improve the compliance level of a time and satisfy the current demand. This alternative is based on the use of line balance tools and heijunka for the elimination of wastes. Finally, the NPV and the IRR have been calculated to determine the viability of the investment of the improvement proposal.en_US
dc.description.uriTesises_PE
dc.formatapplication/pdfen_US
dc.formatapplication/epuben_US
dc.formatapplication/msworden_US
dc.language.isospaen_US
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectCreación de empresasen_US
dc.subjectIndustria metalmecánicaen_US
dc.subjectAdministración de procesosen_US
dc.subjectLean manufacturingen_US
dc.subjectMaquinariaen_US
dc.subjectGestión de la calidaden_US
dc.titlePropuesta de mejora del proceso de reparación de equipos aplicando Lean Manufacturing en una empresa de renta de maquinaria para construcción y mineríaen_US
dc.typeinfo:eu-repo/semantics/bachelorThesisen_US
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingenieríaes_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineIngeniería Industriales_PE
thesis.degree.nameIngeniero industriales_PE
refterms.dateFOA2019-01-10T18:28:03Z
dc.identifier.isni0000 0001 2196 144X
renati.typehttp://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttp://purl.org/pe-repo/renati/nivel#tituloProfesionales_PE
dc.publisher.countryPEes_PE
dc.type.otherTesises_PE


Files in this item

Thumbnail
Name:
miranda_rp-torres_zr.pdf
Size:
5.543Mb
Format:
PDF
Thumbnail
Name:
miranda_rp-torres_zr.epub
Size:
12.04Mb
Format:
application/epub
Thumbnail
Name:
miranda_rp-torres_zr.Ficha.pdf
Embargo:
2088-11-15
Size:
75.41Kb
Format:
PDF
Thumbnail
Name:
miranda_rp-torres_zr.docx
Embargo:
2088-11-15
Size:
11.06Mb
Format:
Microsoft Word 2007

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess