Show simple item record

dc.contributor.advisorEyzaguirre Munarriz, Juan Carlos
dc.contributor.authorGamarra Sánchez, Luis Andrés*
dc.date.accessioned2018-09-07T20:02:54Z
dc.date.available2018-09-07T20:02:54Z
dc.date.issued2018-05-24
dc.identifier.citation[1] L. A. Gamarra Sánchez and J. C. Eyzaguirre Munarriz, “Propuesta de mejora de procesos en la atención de aeronaves en tránsito de la flota Airbus de LAN Perú, para incrementar la productividad en el área de mantenimiento,” Universidad Peruana de Ciencias Aplicadas (UPC), Lima, Perú, 2018. doi: http://doi.org/10.19083/tesis/624201es_PE
dc.identifier.doi10.19083/tesis/624201es_PE
dc.identifier.urihttp://hdl.handle.net/10757/624201
dc.description.abstractLa presente tesis se basa en una propuesta de mejora de procesos en la atención de aeronaves en tránsito de la flota Airbus de una aerolínea comercial, cuyo objetivo es incrementar la productividad en el área de mantenimiento. En el capítulo 1, se desarrolló en el marco teórico las metodologías y herramientas para buscar dar solución al problema. En el capítulo 2, se describen los procesos y se analizó el problema, determinando que en el proceso de producción, donde se realizan trabajos de mantenimiento programados en el hangar, actualmente se cancelan en promedio el 30% de trabajos por falta de horas hombre, encontrándose por encima del 15% del límite establecido por la compañía, el cual trae como consecuencia asumir costos de hangar sin utilizarlo a su máxima capacidad. Por otro lado, en el proceso de línea, donde se realizan inspecciones y mantenimiento correctivo a las aeronaves en los gates del aeropuerto, se identificó que existen desperdicios de horas hombre por actividades que no agregan valor al proceso, generando una baja productividad en el área. En el capítulo 3, se propone alternativas de solución bajo la metodología PDCA de mejora continua y herramientas de Ingeniería de Métodos, donde se busca recuperar horas hombre del personal técnico del proceso de línea, para distribuirlas al proceso de producción, con el fin de reducir el porcentaje de trabajos cancelados, sustentado la viabilidad económica del proyecto en un análisis financiero. En el capítulo 4, se realizó la simulación del proceso mejorado, apoyado en el software Arena y @RISK con el fin de validar la propuesta. Finalmente, en el capítulo 5 se concluyó que con la mejora de procesos se lograra incrementar la productividad de 3.08 aviones/técnico a 5.88 aviones/técnico.en_US
dc.description.abstractThis thesis is based on a proposal to improve processes in the attention of aircraft in transit of the Airbus fleet of a commercial airline, whose objective is to increase productivity in the maintenance area. In chapter 1, the methodologies and tools to find a solution to the problem were developed in the theoretical framework. In chapter 2, the processes were described and the problem was analyzed, determining that in the production process, where scheduled maintenance works are carried out in the hangar, an average of 30% of the works are currently canceled due to lack of man hours, being above 15% of the limit established by the company, which has the consequence of assuming the costs of the hangar without using it to its maximum capacity. On the other hand, in the line process, where inspections and corrective maintenance are carried out on the aircraft at the airport gates, it was identified that there is waste of man hours for activities that do not add value to the process, generating low productivity in the area. In chapter 3, alternative solutions are proposed under the PDCA methodology of continuous improvement and tools of Methods Engineering, where it is sought to recover man-hours of the technical personnel of the line process, to distribute them to the production process, in order to reduce the percentage of jobs canceled, supporting the economic viability of the project in a financial analysis. In Chapter 4, the simulation of the improved process was carried out, supported by the Arena and @RISK software to validate the proposal. Finally, in chapter 5 it was concluded that with the processes improvement it will be possible to increase the productivity of 3.08 aircraft / technicians to 5.88 aircraft / technicians.en_US
dc.description.uriTesises_PE
dc.formatapplication/pdfen_US
dc.formatapplication/epuben_US
dc.formatapplication/msworden_US
dc.languagespaes_PE
dc.publisherUniversidad Peruana de Ciencias Aplicadas (UPC)en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.sourceUniversidad Peruana de Ciencias Aplicadas (UPC)es_PE
dc.sourceRepositorio Académico - UPCes_PE
dc.subjectAdministración de procesosen_US
dc.subjectMejora de procesosen_US
dc.subjectProductividaden_US
dc.subjectIngeniería Industrialen_US
dc.titlePropuesta de mejora de procesos en la atención de aeronaves en tránsito de la flota Airbus de LAN Perú, para incrementar la productividad en el área de mantenimientoen_US
dc.typeinfo:eu-repo/semantics/bachelorThesisen_US
thesis.degree.grantorUniversidad Peruana de Ciencias Aplicadas (UPC). División de Estudios Profesionales para Ejecutivos (EPE)es_PE
thesis.degree.levelLicenciaturaes_PE
thesis.degree.disciplineIngeniería Industriales_PE
thesis.degree.nameIngeniero industriales_PE
thesis.degree.programDivisión de Estudios Profesionales para Ejecutivos (EPE)es_PE
refterms.dateFOA2018-09-07T20:02:55Z
renati.typehttps://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttps://purl.org/pe-repo/renati/level#tituloProfesionales_PE
renati.discipline722026es_PE
dc.publisher.countryPEes_PE
dc.type.otherTesises_PE


Files in this item

Thumbnail
Name:
Gamarra_SL.pdf
Size:
5.253Mb
Format:
PDF
Thumbnail
Name:
Gamarra_SL.docx
Embargo:
2088-05-24
Size:
11.79Mb
Format:
Microsoft Word 2007
Thumbnail
Name:
Gamarra_SL_ficha.pdf
Embargo:
2088-05-24
Size:
48.76Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess