Análisis del comportamiento mecánico del suelo arcilloso reforzado con PET para obras geotécnicas, proveniente de botellas plásticas recicladas, en el distrito de Ricuricocha -Tarapoto
Average rating
Cast your vote
You can rate an item by clicking the amount of stars they wish to award to this item.
When enough users have cast their vote on this item, the average rating will also be shown.
Star rating
Your vote was cast
Thank you for your feedback
Thank you for your feedback
Asesores
Durán Ramírez, Gary GaryFecha de publicación
2021-01-28Palabras clave
Suelo arcillosoÁngulo de fricción
Cohesión
Mejoramiento de suelo
Clayey soil
Internal friction angle
Soil improvement
Metadatos
Mostrar el registro completo del ítemOtros títulos
Analysis of the mechanical behavior of a clay soil reinforced with PET, polyethylene terephthalate, from recycled plastic bottles, in the province of TarapotoResumen
La presente tesis evalúa el comportamiento mecánico de un suelo arcilloso mezclado con PET triturado. El uso potencial de este material plástico en aplicaciones geotécnicas puede reducir el problema de la eliminación inadecuada y mejorar las características de resistencia y deformación del suelo. Se empleó Tereftalato de polietileno, PET, y suelo arcilloso proveniente de la provincia de Tarapoto. Los parámetros de resistencia al corte que definen las características mecánicas del suelo son el ángulo de fricción y la cohesión. En la ejecución de una obra civil, estos parámetros generalmente no se ajustan a los requerimientos del proyecto, por tal razón se debe buscar una solución para la estabilidad del suelo implicado en cualquier construcción. Esta tesis se realizó en tres etapas, la primera fue la recolección de información, la segunda la fase de laboratorio, llevándose a cabo ensayos de Proctor estándar (densidad – humedad), corte directo (ángulo de fricción y cohesión), limite líquido, limite plástico y granulometría; y por último el análisis de los resultados. El suelo arcilloso utilizado fue mezclado con 5%, 10% y 20% de PET triturado en peso seco. Los porcentajes de PET aumentaron la capacidad de soporte del suelo.This thesis evaluates the mechanical behavior of a clay soil mixed with crushed PET. The potential use of this waste material in geotechnical applications may ultimately reduce the problem of improper disposal and improve the strength and deformation characteristics of the soil. Polyethylene terephthalate, PET, and clayey soil from the province of Tarapoto were used. The shear strength parameters that define the mechanical properties of soil are the internal friction angle and cohesion. While constructing any civil engineering structure, those parameters usually do not adjust to the requirements of the Project, therefore, there must be a solution for the soil stability in any civil work. This thesis was carried out in three stages, the first was the collection of information, the second the laboratory phase, carrying out standard Proctor tests (density - humidity), direct cutting (angle of friction and cohesion), liquid limit, limit plastic and granulometry; and finally the analysis of the results. The clayey soil used was mixed with 5%, 10% and 20% of crushed PET by dry weight. The percentages of PET increased the soil support capacity.
Tipo
info:eu-repo/semantics/bachelorThesisDerechos
info:eu-repo/semantics/openAccessAttribution-NonCommercial-ShareAlike 4.0 International
Idioma
spaColecciones
El ítem tiene asociados los siguientes ficheros de licencia:
- Creative Commons
Excepto si se señala otra cosa, la licencia del ítem se describe como info:eu-repo/semantics/openAccess